Ski Services

santaskiwax

Looking to improve your experience or performance? Our expert staff can help with everything from binding mounting to ski waxing to gluing skins. Check out the options below.

Shop Rate: $60/hour

Ski Mounting

3-Pin without cable, SNS, NNN, NIS Plate, Universal (Boot size required): $20

3-Pin Cable/Telemark/AT (Both boots required for proper installation and cable adjustment. Sorry, we do not adjust DIN settings on AT or releasable bindings): $50

Riser Plate: $35

Binding Removal: $5-10

Base Service

Waxless Touring Prep (fish scales without metal edges) $20

Includes binding inspection, base peel (to remove oxidation), base clean, universal glide wax from tip to tail (including the fish scales to prevent snow from sticking), and hand brushed finish

Waxless Backcountry Prep (fish scales with metal edges) $50

Includes binding inspection, base peel (to remove oxidation), base clean, hand sharpened edges with custom bevel and diamond stone polish, universal glide wax from tip to tail (including the fish scales to prevent snow from sticking), and hand brushed finish

Backcountry/Tele/AT Prep (no fish scales with metal edges) $50

Includes binding inspection, base peel (to remove oxidation), base clean, hand sharpened edges with custom bevel and diamond stone polish, three coats of hotwax — two coats of Swix Base Prep and one hotwax coat of temperature-specific Swix LF glide wax or upgrade to Swix HF glide wax (+$20), and hand brushed finish

Skate Performance Prep $40

Includes binding inspection, base peel (to remove oxidation), base clean, three coats of hotwax — two coats of Swix Base Prep and one hotwax coat of temperature-specific Swix LF glide wax or upgrade to Swix HF glide wax (+$20), and hand brushed finish

Classic Performance Prep $40
There’s nothing like perfectly waxed classic skis with a good kick! Includes binding inspection and for the glide zones: base peel, base clean, three coats of hotwax — two coats of Swix Base Prep and one hotwax coat of temperature-specific Swix LF glide wax or upgrade to Swix HF glide wax (+$20), and hand brushed finish. For the kick zone: base textured with fine grit sand paper and one ironed-in layer of Swix Base Binder.  Application of six corked-in layers of temperature specific kick wax or application of Klister (+$15)

Wooden Ski Prep $50

Includes base clean, sanding of base with fine grit sandpaper, pine tar application and impregnation, and corked-in glassy finish. Application of six corked-in layers of temperature specific kick wax or application of Klister and wax for glide with three corked-in layers of Swix Polar wax (minimum of 24 hours after pine tar application) +$20

Other Services

Heli-Coil: $20-40

Glue renew for climbing skins: $60

Custom cut climbing skins: $25

Custom cut ski poles: $10

Install Tips & Grips: $10 single, $30 all

Thermo Fit Boots: $30

IMG_4228

 

 

 

 

 

 

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *